A quick share: In one minute, let me explain the principle of a paddle dryer.
Release time:
Jan 03,2023
The paddle dryer is an energy-saving drying device, generally used for drying granular and powdered materials. In addition, it can also dry paste-like materials. Paddle dryers are widely used in industries such as industrial, chemical, and food sectors that require drying equipment. They have good drying effects, can reduce and accelerate work progress, and improve the storage of materials.
The paddle dryer is an energy-saving drying device, generally used for drying granular and powdery materials. In addition, it can also dry paste-like materials. Paddle dryers are widely used in industries such as industrial, chemical, and food that require drying equipment. They have good drying effects, can reduce and accelerate work progress, and allow for better storage of materials. The paddle dryer was successfully developed in Germany earlier, and Japan later introduced this technology and improved it, developing a series of products with double-axis, four-axis structures, and more than ten specifications. Since the heat required for the drying process of this equipment is indirectly heated through heat conduction, only a small amount of gas is needed to carry away moisture during the drying process, greatly reducing the loss of heat carried away by the gas and improving the utilization rate of heat. The dynamic paddle dryer is an energy-saving drying device suitable for drying granular and powdery materials, and it can also successfully dry paste-like materials.
What is the principle of the paddle dryer? Let's analyze it below.
The paddle dryer is a horizontal stirring dryer mainly based on conduction, with a main structure of a W-shaped shell with a jacket. Inside the shell, a pair of hollow low-speed rotating hollow shafts is installed, with several stirring blades, jackets, and hollow stirring blades welded onto the shafts. The interior is filled with a heat carrier, and both heating surfaces heat the material simultaneously. The heat carrier is usually sent out from the middle of the dryer, passing over the surface of the stirred material layer and discharged from the other side.
The hollow shaft is densely packed with wedge-shaped hollow blades, and the heat medium flows through the hollow shaft and across the blades. The heat transfer area within the effective volume is large, and the temperature of the heat medium can range from -40 to 320°C. It can be steam or liquid, such as hot water or heat transfer oil. Indirect heating does not carry air to take away heat, which is used to heat the material. Heat loss occurs only through the insulation layer of the device to the environment. The wedge-shaped heat transfer surface has a self-cleaning function, where the relative motion of the material particles and the wedge surface generates a cleaning function that can wash away the adhered materials on the wedge surface, keeping the heat transfer surface clean during the movement.
What are the applicable materials for the paddle dryer? Let's analyze it together.
1. Inorganic chemicals: calcium nitrate, calcium sulfate, paper calcium, calcium carbonate, magnesium hydroxide, carbon black, iron black, iron red, soda ash, etc.
2. Organic chemicals: dyes, industrial plastics, polystyrene, polypropylene, high and low-density polyethylene, polypropylene, etc.
3. Smelting industry: nickel concentrate powder, sulfur concentrate powder, tar dephenol, etc.
4. Food and pharmaceutical industry: starch, medicine, salt, protein, etc.
5. Others: sludge, waste residue, chicken feed, distiller's grains, etc.
The above is a brief introduction by the editor about the principle and applicable materials of the hollow paddle dryer, hoping to help everyone.
keywords
:Next Page
Next Page: