Description

Principle:

 

During mixing, the materials are subjected to high-speed agitation. Under the influence of centrifugal force, the materials rise along the side walls of the mixing chamber, fall once they reach a certain height or encounter deflection baffles, and then rise and fall again.

The vertically mounted motor directly drives the drive pulley inside the transmission box at high speed. The rotational speed of the mixing shaft is controlled by adjusting the sizes of the driving and driven pulleys. The impeller, which rotates at high speed on the mixing shaft, generates intense friction with the material via its twisted surface. At the same time, the tangential motion of the twisted surface along the cylinder wall exerts a propulsive force on the material, causing it to rise in a spiral motion. Several reverse-flow baffles installed above the cylinder wall thoroughly disrupt the material’s trajectory, prompting the material to fall back to the bottom of the high-speed mixer under the influence of gravity. Under the continuous, high-speed, reciprocating mixing action, the material achieves an even higher degree of uniformity, making this equipment an ideal choice for high-speed mixing applications.

The high-speed rotating rotor drives the liquid flow, and under the action of the guide chamber, a strong vertical liquid circulation is generated. As a result, the liquid in the container begins to circulate as a whole, achieving macroscopic mixing. On the other hand, the high-speed rotating rotor also generates the specific shear turbulence necessary for microscopic mixing. These liquids, having undergone microscopic mixing, are then dispersed throughout every corner of the container along with the overall liquid flow circulation.

At the same time, the material collides and rubs against the blades, the inner walls, and other material particles, causing the temperature to rise rapidly. In addition, the baffle plates further disrupt the flow of material, inducing irregular motion and generating intense vortices near the baffle plates, which in turn promote even greater dispersion and mixing of the material. The degree of mixing can be categorized into three states: ideal mixing, random mixing, and complete immiscibility. The extent of mixing achieved in high-speed mixing equipment depends on factors such as the proportions of the materials to be mixed, their physical states and properties, the type of high-speed mixing equipment used, and the duration of the mixing operation.

Features:

1. The hood and cylinder are sealed with silicone rubber gaskets, which are wear-resistant and high-temperature resistant.

2. The discharge method is diversified, with options for pneumatic and manual operation.

3. The hood can be installed either pneumatically or manually; both methods provide excellent clamping and sealing performance.

4. If the material inside the high-speed mixer needs to be moistened or granulated, a spray system can be installed on the top cover to atomize the liquid and spray it onto the surface of the material.

5. The straight section of the high-speed mixer’s cylinder is seamlessly connected to the bottom via a rounded transition, and the curvature of the mixing blades matches this transition exactly. This ingenious design ensures that there are no dead corners in the mixing process.

6. The straight sections around the cylinder of the high-speed mixer, as well as beneath its bottom, are all equipped with jacket layers that can be supplied with hot or cold fluids, ensuring uniform heating or cooling effects.

7. The sealing device is equipped with a jacket through which cooling water flows to dissipate the residual heat generated by high-speed rotation, thereby providing more effective protection for the sealing device.

 

Application:

Particularly suitable for efficient and uniform mixing of solid-liquid, solid-powder, powder-powder, and powder-liquid systems. Discharge valves—ball valves, butterfly valves, and gate valves—are available for selection.

The product is widely used in the mixing of fine chemical products, feed, electronics, food, hard materials, ceramic materials, biology, pharmaceuticals, non-metallic mining, construction materials, coatings, dyes, fertilizers, and metal powders. It is particularly effective for blending shear-sensitive crystalline powders, batch products, and for incorporating liquids into solids.

 

Technical specifications:

TypeWorking Volume (L)Mixing weight(kg/time)Installed power KWWeight(kg)Overall dimensions(mm)
LGH-3503501507.376001500*1090*1200
LGH-65065025013.56901600*1100*1300
LGH-85085037016.59801718*1320*1400
LGH-1000100045020.712001830*1450*1500

 

Keywords: High-speed mixer

Send Inquiry

NOTE: Please leave your email, our professional person will contact you asap!