Categories
Search
Category:
NLG Series Internal Heating Fluidized Bed Dryer
Description
Overview:
The internally heated fluidized-bed dryer is a new type of drying technology developed on the basis of conventional fluidized-bed drying and indirect-heating drying. In this dryer, a heat exchanger is immersed directly into the fluidized drying material. The heat required for material dehydration is supplied separately by a tubular heat exchanger and by hot air used for fluidization, allowing the process to meet fluidization-drying requirements with a significantly lower air volume. Since most of the heat is provided by the built-in heat exchanger, the hot air primarily serves as a driving medium to ensure normal fluidization. Consequently, the amount of hot air required is much lower than that in conventional fluidized-bed dryers, leading to a substantial reduction in electricity consumption and waste-gas heat loss.

Features:
1. Energy-saving and efficient
2. The amount of dry air is small, and the system consumes low electricity.
3. High drying efficiency, compact equipment size, and small system footprint.
4. Wide operational flexibility and system operating temperature.
5. A special air distribution plate that prevents material leakage and facilitates the discharge of large-sized particles.
6. Using a two-stage dust removal system can meet environmental emission requirements.
Application:
Applicable Materials: Ammonium hydride, ammonium nitrate, calcium chloride, calcium formate, calcium gluconate, calcium sulfate, cellulose derivatives, diammonium phosphate, dicalcium phosphate, granular fertilizers, hydroquinone, ferrous sulfate, ethylene, propylene, polystyrene, potassium carbonate, potassium chloride, potassium nitrate, potassium phosphate, sodium potassium tartrate, sodium sulfate, polyvinyl chloride, sodium bicarbonate, sodium bromide, sodium formate, sodium perborate, sodium sulfate, tartaric acid, terephthalic acid, urea, vitamins, barium sulfate, magnesium sulfate, zinc sulfate, aluminum sulfate, nickel sulfate, ammonium sulfate, table salt, sodium fluoride, titanium dioxide, potassium bromide, ammonium bromide, sodium carbonate, basic nickel carbonate, basic zinc carbonate, basic chromium carbonate, calcium carbonate, sodium metasilicate, sodium chromate, potassium acetate, sodium benzoate, acryloyl monomer, polyacrylamide, nylon 1010, polypropylene resin, polyester chips, polytetrafluoroethylene, alkyd resin, oxytetracycline, tetracycline, anhydrotetracycline, humic acid, sodium humate, lysine.
Technical specifications:
| Spec | Fluidized area (㎡) | Power KW | Steam pressure (MPa) | Steam Consumption (kg/h) | Tem.of inlet air ℃ | OVerall Dimensions L*W*H mm | occupying area ㎡ |
| NLG2.0 | 2 | 50 | 0.2-1.0 | 400-1000 | 100-300 | 3000*1300*4500 | 45 |
| NLG2.5 | 2.5 | 65 | 600-1200 | 3500*1300*4500 | 55 | ||
| NLG3 | 3 | 85 | 1400-2200 | 3600*1400*4500 | 65 | ||
| NLG3.5 | 3.5 | 95 | 1000-2000 | 4000*1500*4500 | 80 | ||
| NLG4.0 | 4.0 | 110 | 1200-2000 | 4600*1600*5000 | 90 | ||
| NLG5.5 | 5.5 | 130 | 1400-2200 | 5000*1650*5000 | 100 | ||
| NLG6 | 6 | 140 | 1600-2800 | 6000*1700*5000 | 110 | ||
| NLG7 | 7 | 165 | 1800-3200 | 6600*1750*5000 | 120 | ||
| NLG8 | 8 | 170 | 2000-2800 | 7500*1800*5000 | 130 |
| NLG10 | 10 | 210 | 2400-3600 | 10000*1850*6000 | 140 | ||
| NLG15 | 15 | 300 | 3200-4400 | 15000*1900*6500 | 200 | ||
| NLG20 | 20 | 320 | 4000-6000 | 20000*2000*7000 | 240 |
Keywords: NLG Series Internal Heating Fluidized Bed Dryer
Send Inquiry
NOTE: Please leave your email, our professional person will contact you asap!