Categories
Search
Category:
DG Series Starch Airflow Dryer
Description
Overview:
The DG series air-flow drying unit is a complete set of equipment designed for drying dehydrated starch from wet-process corn, tubers, and other raw materials. It can also be used for drying other heat-sensitive powdered or flake-like materials that require rapid drying.



Principle:
In an air-flow dryer, a high-speed hot air stream circulates rapidly, suspending powdered or granular materials within it and thereby drying them. Due to the high air velocity, the material particles remain suspended in the air stream, resulting in an extremely large heat-transfer surface area between the gas and solid phases and a high heat-transfer coefficient. Consequently, the drying time is very short—often just a few seconds for most materials—making this method particularly suitable for drying heat-sensitive materials.
During the drying process, filtered cold air is heated and then mixed with wet starch that has been conveyed from the screw feeder and lifted into the duct via an elevator. This mixture is instantly dried. The dried starch is discharged through a cyclone separator and a discharge valve, while the exhaust gases are expelled into the atmosphere by a fan.
Technical specifications:
| Specification | Capacity of starch | Total power (KW) | Steam consume(kg) | Finished starch moisture |
| DG-0.5 | 0.5 | 1.8-2.0 | 12-14% | |
| DG-0.8 | 0.8 | 21.6 | 1.8-2.0 | 12-14% |
| DG-1 | 1 | 24.6 | 1.8-2.0 | 12-14% |
| DG-1.2 | 1.2 | 26.6 | 1.8-2.0 | 12-14% |
| DG-1.6 | 1.6 | 30.1 | 1.8-2.0 | 12-14% |
| DG-2 | 2 | 47.6 | 1.8-2.0 | 12-14% |
| DG-2.6 | 2.6 | 59.5 | 1.8-2.0 | 12-14% |
| DG-3.2 | 3.2 | 75 | 1.8-2.0 | 12-14% |
| DG-3.6 | 3.6 | 95 | 1.8-2.0 | 12-14% |
| DG-5 | 5 | 123.4 | 1.8-2.0 | 12-14% |
| DG-6 | 6 | 170 | 1.8-2.0 | 12-14% |
| DG-10 | 10 | 223.5 | 1.8-2.0 | 12-14% |
| DG-20 | 20 | 440 | 1.8-2.0 | 12-14% |
Keywords: DG Series Starch Airflow Dryer
Send Inquiry
NOTE: Please leave your email, our professional person will contact you asap!