Category:
White carbon black drying project
Description
Introduction to White Carbon Black
White carbon black is a general term for white powdery X-ray amorphous silica and silicate products, mainly referring to precipitated silica, fumed silica, ultrafine silica gel, and aerogel, as well as powdered synthetic aluminum silicate and calcium silicate. White carbon black is a porous material, and its composition can be represented as SiO2·nH2O, where nH2O exists in the form of surface hydroxyls. It is soluble in caustic alkali and hydrofluoric acid, but insoluble in water, solvents, and acids (except hydrofluoric acid). It is heat-resistant, non-flammable, odorless, and has excellent electrical insulation properties.
Working Principle
Hot air enters the drying chamber from the bottom of the dryer through the inlet pipe at an appropriate spraying speed, creating strong shear, blowing, and rotating effects on the material. As a result, the material is subjected to centrifugal, shear, collision, and friction forces, leading to particle size reduction and enhanced mass and heat transfer. At the bottom of the dryer, larger and wetter particle clusters are mechanically broken down by the stirrer, while particles with lower moisture content and smaller size are carried upward by the rotating airflow, further drying during the ascent. Due to the rotational flow of the gas-solid two-phase system, the solid phase has greater inertia than the gas phase, resulting in a larger relative velocity between the two phases, which enhances mass and heat transfer between them. Therefore, this machine has a high production intensity.
Keywords: White carbon black drying project
Send Inquiry
NOTE: Please leave your email, our professional person will contact you asap!