+
  • 6(4).jpg

Silicon Carbide Drying Project

The silicon carbide drying production line is a new type of efficient fluidized drying equipment developed by our company to overcome the inefficiencies and high consumption of static drying. During the design process, the machine fully integrates the characteristics of airflow drying and other fluidized drying methods, maximizing strengths and minimizing weaknesses, resulting in a reasonable process structure and superior performance. It truly achieves the goals of low consumption and high efficiency in fluidized drying.

Description

Project Overview:
Silicon carbide (SiC) is made from quartz sand, petroleum coke (or coal coke), and wood chips through high-temperature smelting in a resistance furnace. Silicon carbide also exists in nature as a rare mineral, moissanite. Silicon carbide is also known as carborundum. Among contemporary non-oxide high-tech refractory materials such as C, N, and B, silicon carbide is widely used and economical. It can be referred to as emery or refractory sand. Currently, the silicon carbide produced in our country is divided into black silicon carbide and green silicon carbide, both of which are hexagonal crystals with a specific gravity of 3.20 to 3.25 and a microhardness of 2840 to 3320 kg/mm².


Equipment Overview:
The silicon carbide drying production line is a new type of efficient fluidized drying equipment developed by our company to overcome the inefficiency and high consumption of static drying. The design of this machine fully combines the characteristics of airflow drying and other fluidized drying methods, maximizing strengths and minimizing weaknesses, resulting in a reasonable process structure and superior performance, truly achieving the goals of low consumption and high efficiency in fluidized drying.
This machine has a very wide range of applications and can be used for drying lightweight fine powder materials such as silicon carbide, black silicon carbide, green silicon carbide, black silicon carbide micro powder, green silicon carbide micro powder, foam ceramic silicon carbide, and refractory material silicon carbide. The equipment has high thermal efficiency, low energy consumption, a small footprint, simple configuration, and convenient operation and control.


Working Principle:
Hot air enters the drying chamber from the bottom of the dryer at a suitable spraying speed through the air inlet, creating strong shear, floating, and rotational effects on the material. As a result, the material is subjected to centrifugal, shear, collision, and friction forces, leading to particle size reduction and enhanced mass and heat transfer. At the bottom of the dryer, larger and wetter particle agglomerates are mechanically broken down by the stirrer, while particles with lower moisture content and smaller size are carried upward by the rotating airflow, further drying during the ascent. Due to the rotational flow of the gas-solid phase, the inertia of the solid phase is greater than that of the gas phase, resulting in a larger relative velocity between the two phases, which enhances the heat transfer effect between them, thus providing high drying intensity.


Project Advantages:
1. Strong professionalism, large processing capacity, fast drying rate; after atomization, the surface area of the material significantly increases, greatly reducing drying time under vacuum conditions. 2. Simple equipment structure, no easily damaged parts, low maintenance costs. 3. Simple and stable operation, convenient control, capable of intelligent operation. 4. Achieves liquid-liquid separation using different boiling point temperatures. 5. Uses specially designed non-standard atomizers for good atomization and separation effects. 6. Integrates chemical reactions and drying, completing both in one step, optimizing equipment performance.

Keywords: Silicon Carbide Drying Project

Send Inquiry

NOTE: Please leave your email, our professional person will contact you asap!